2000 Troyer Modified!

  • You DO NOT need an account in order to download the content that we host....ONLY make an account if you plan to be an ACTIVE member.
  • We DO NOT Allow Multiple Accounts, those people found to have more than one linked to their IP address Will be Banned.

Cola83

Well-Known Member
VIP
Hot Pass Member
Jan 10, 2018
210
83
*** UPDATE JUNE 24th 2021 ***

Went to New Jersey with the cargo van, Brought back a good bit. Today i sold something in order to get some cash for the 602 Motor that i will be using. That search begins now.
Started to put the sheetmetal on were I can, also added the front wind shield. Will need theother part of the shield.

View attachment 105149View attachment 105150
Got to have car parts... Looks like a lot of good stuff. Can't wait to see finished Car.. :)
 
  • Like
Reactions: 2guns

SprintRacer92

Well-Known Member
Hot Pass Member
Mar 9, 2020
575
93
92ryan67a
*** UPDATE JUNE 24th 2021 ***

Today i sold something in order to get some cash for the 602 Motor that i will be using. That search begins now.

I wish you luck with that, Chose a rough time to get a 602's my man. after a few weeks of waiting I'm finally getting my 602 tomorrow to complete my 602 Sprint Car build so I can run both 360's and 602's. Demand is higher than supply, prices are up thanks to low part availably, and to boot there isn't hardly any left. 3 months ago they were $4500, now its $5900 for JUST the 602.
 
  • Like
Reactions: 2guns

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
I wish you luck with that, Chose a rough time to get a 602's my man. after a few weeks of waiting I'm finally getting my 602 tomorrow to complete my 602 Sprint Car build so I can run both 360's and 602's. Demand is higher than supply, prices are up thanks to low part availably, and to boot there isn't hardly any left. 3 months ago they were $4500, now its $5900 for JUST the 602.

well i am trying to have hope lol, in all hoensty i am just doing vintage for now so i can put any motor in it, but i wanted the 602 for when i decide to run competitively.
 
  • Like
Reactions: DodgeMan4345

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
update July 24th 2021.

Finally found the parts needed to put the rear end together, Started working with George Brunnhoelzl the 3rd with locating parts. Will be taking care of alot,
now i am in search of the 2000 troyer wide body motor mounts, as well as a few other pieces. Althought its going slow, the dream marches foward!
A special thank you to Todd Owen who made the front bumper for me, I painted it black today lol Sponsor search continues lol Here is some updated pictures!20210722_145507.jpg 20210724_154134.jpg20210724_164924.jpg 20210723_150905.jpg
 

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
ooof its been awhile since i had any update, well after a nice trip back to new jersey i was able to get some rims and body panels. Today I also picked up the steering wheel from Circle Track warehouse.
the door and quarter panles will be rewrapped with my scheme on the car. So that 24 will not be my number, 37 is my number until death lol
Big things happening, Will be submitting my sponsorship proposal to a few companies. Wish me luck! The dream is still live and well.
memodresized.jpgmewhhelrez.jpg
 

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
due to a terrible work schedule i havent had much time to do anything, really havent had time to myself, but I was able to find some time and rebuild the Master Cylinders and order some parts to run my brake lines.
The car is no longer outside in the elements, its actually at my friends race shop on a lift. So thats a huge plus. was able to purchase a seat and now just need 500 more dollars for the engine. Here is a couple new pictures. resized1.jpgresized1.jpg8698.jpeg
 

DaleTona

The Professor
Hot Pass Member
Aug 16, 2016
1,636
113
due to a terrible work schedule i havent had much time to do anything, really havent had time to myself, but I was able to find some time and rebuild the Master Cylinders and order some parts to run my brake lines.
The car is no longer outside in the elements, its actually at my friends race shop on a lift. So thats a huge plus. was able to purchase a seat and now just need 500 more dollars for the engine. Here is a couple new pictures. View attachment 113165View attachment 113166View attachment 113164
That's badass! I love seeing the guts of race cars.
 
  • Like
Reactions: 2guns

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
made that above for a little fun, Brake lines are installed need to rebuild the calipers and put the new pads in, also replacing the old rotors. Still trying to find the money for the engine.
down to 500 dollars needed to buy it. My passion for modifieds will find the way to get it done.
 
  • Like
Reactions: DodgeMan4345

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
Update Feb 2, 2022 Gosh it's been awhile...

So since then, the Seat has been installed and bolted in, replaced the bearings on all 4 hubs of the modified.
Still waiting to bring home the engine from a friend's shop. Came across a problem with the left axle housing tube. It was severely bent
So I am waiting to pick it up from Buzze Racing, The best in the world when it comes to rear ends and steering.

March 20th is opening night. I still have a ton to get done and running out of money and time. The amount of stress I am under trying to get it done on a Grocery Store budget is intense.
I have sent out 200 emails trying to find a sponsor, with no luck at all.. I refuse to give up because I have come a long way on this journey to completing my dream.

We Still need a Fuel Bladder, 5 1/2-inch clutch, carburetor, fire suppression system and radios. plus, extra rims and tires. I don't know how I'm going to do it but it has to be done..

I plead and pray to the lord above someone answers my emails.
 

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
Wow, I am sorry.. its been a long time since i have done an update.

Finding money for parts has been hard to come buy, but some how i've been able to continue. The car is 98% done. I have to five my seat mounts and belts, add a couple hoses and find the money for lead once i can get this car scaled. I am in desperate need of more sponsor help in order to get going, we need at least $1600 more to make the July 23rd race. If I can find the 1500 this car will be there that night. I am grateful to the 3 sponsors that helped me. I wont let them down.

Here is a time lapse video of the decals being appplied to the car, and a few new pictures.

View: https://youtu.be/PvxCMq-JDxw


20220403_153457.jpg20220416_203848.jpg20220402_211552.jpg20220403_153457.jpg20220402_211434.jpg20220402_210331.jpg20220402_211628.jpg
 

2guns

Well-Known Member
VIP
Hot Pass Member
Apr 24, 2017
248
63
We took the modified out to our Sponsors restaraunt! Had a great time! Glad to see the girl get some love! Thank you to everyone at Bobbee O's BBQ
 

Attachments

  • O20220903_145313.jpg
    O20220903_145313.jpg
    2.3 MB · Views: 11
  • 51343.jpeg
    51343.jpeg
    467 KB · Views: 11
  • 51116.jpeg
    51116.jpeg
    65.9 KB · Views: 9
  • 51120.jpeg
    51120.jpeg
    23.8 KB · Views: 10
  • IMG_20220903_182103_935.jpg
    IMG_20220903_182103_935.jpg
    801.1 KB · Views: 10

Hot Links