Angle declension on MENCS templates

  • You DO NOT need an account in order to download the content that we host....ONLY make an account if you plan to be an ACTIVE member.
  • We DO NOT Allow Multiple Accounts, those people found to have more than one linked to their IP address Will be Banned.

Eric Hostetler

Well-Known Member
Hot Pass Member
Aug 17, 2017
347
63
Hi All!

Been doing this a while now and thought I would share it because it's the same on both Mencs 18 and 19.....When you are placing your numbers on the driver's side and have them sized the way you want, and the transform box is enabled, you click on it so the little turn arrow is highlighted....At the top of the screen you will see all these boxes with different values. You look for the one with the little angle symbol. You click on the number and then clear it...Type in -1 and click on pointer tool. It will ask you if you want to accept this change...Say yes and your number will be angled perfectly for the MENCS templates and will show up good on the render....

Now, once you have copied the number layer and moved it to the passenger side and transformed it 180 degrees and have it positioned where you want it, it will be a little off....Do as before and get to the angle symbol box and this time type in 2. This will adjust your number perfectly for the template and all you have to do is make your final adjustments and you have now placed both side numbers so they will look good. Top number and rear numbers are straight up and down. Front number may have to be adjusted depending on template.

Hope this helps!

White Eagle

ps. I forgot who taught me this, but if you remember, thanks for teaching this to me....
 
  • Like
Reactions: Griffdawg

Hot Links